|
|
||||||||||||||||
Product Features
1.Uniform density ensures consistent fiberglass content and mechanical properties of the composites products;
2.Uniform powder distribution ensures good mat integrity, little loose fibers and small roll diameter
3.Excellent flexibility ensures good moldability with no spring back at sharp angles
4.Fast and consistent wet-out speed in resins and rapid air lease reduce resin consumption and production cost, and enhances productivity and mechanical properties of the end products.
5.The composite products have high dry and wet tensile strength and good transparency.
Package:
Each powder chopped strand mat is wound onto a paper tube which has an inside diameter of 90mm and mat roll has a diameter of 260mm. The mat roll is wrapped up with plastic film, and then packed in a cardboard box or wrapped up with kraft paper. The rolls can be vertically or horizontally placed. For transportation, the rolls can be loaded into a container directly or on pallets.
Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15℃-35℃ and 35%-65% respectively.
1.Uniform density ensures consistent fiberglass content and mechanical properties of the composites products;
2.Uniform powder distribution ensures good mat integrity, little loose fibers and small roll diameter
3.Excellent flexibility ensures good moldability with no spring back at sharp angles
4.Fast and consistent wet-out speed in resins and rapid air lease reduce resin consumption and production cost, and enhances productivity and mechanical properties of the end products.
5.The composite products have high dry and wet tensile strength and good transparency.
Package:
Each powder chopped strand mat is wound onto a paper tube which has an inside diameter of 90mm and mat roll has a diameter of 260mm. The mat roll is wrapped up with plastic film, and then packed in a cardboard box or wrapped up with kraft paper. The rolls can be vertically or horizontally placed. For transportation, the rolls can be loaded into a container directly or on pallets.
Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15℃-35℃ and 35%-65% respectively.
Chopped Strand Mat is a non-woven E or C-glassfiber mat product manufactured by spreading continuous filament rovings of 50mm in length randomly and uniformity in combination with polyester binder in powder form(or in emulsion form)
This product is characterized by good combination of resin, easy operation, good wet strength retention, good laminate transparency and low cost. It is suitable for the application by hand lay-up FRP moundings, such as: various sheets and panels, boat hulls, bath tubs, cooling towers, corrosion resistant, vehicles etc.
This product is characterized by good combination of resin, easy operation, good wet strength retention, good laminate transparency and low cost. It is suitable for the application by hand lay-up FRP moundings, such as: various sheets and panels, boat hulls, bath tubs, cooling towers, corrosion resistant, vehicles etc.
Please find the technical data sheet by click "More".
Attachments:More
