|
|
||||||||||||||||
Product Properties,
1.High fiber strength
2.Good integrity and ribbonization
3.Compatibility with a multiple of resin systems
4.Complete and fast wet-out
5.Excellent moisture resistance and low fuzz
6.Excellent mechanical properties.
Package,
The roving to be packed on 20 pallets for a 20' container. The detailed package is listed as follows,
4 X 4 rolls/layer, 4 layer/pallet, 10 pallets
4 X 4 rolls/layer, 3 layer/pallet, 10 pallets.
Each layer is seperated with paperboard.Each pallet is supported by very strong papercoil at the four corners of pallet, then packed in big carton, wrapped in a polythene stretched film. The roving on pallet after package is visible.
Storage,
Unless otherwise specified, fiberglass products should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15℃-35℃ and 35%-65% respecitively. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high. When the pallets are stacked in 2 or 3 layers, care should be taken to correctly and smoothly move the top pallet.
1.High fiber strength
2.Good integrity and ribbonization
3.Compatibility with a multiple of resin systems
4.Complete and fast wet-out
5.Excellent moisture resistance and low fuzz
6.Excellent mechanical properties.
Package,
The roving to be packed on 20 pallets for a 20' container. The detailed package is listed as follows,
4 X 4 rolls/layer, 4 layer/pallet, 10 pallets
4 X 4 rolls/layer, 3 layer/pallet, 10 pallets.
Each layer is seperated with paperboard.Each pallet is supported by very strong papercoil at the four corners of pallet, then packed in big carton, wrapped in a polythene stretched film. The roving on pallet after package is visible.
Storage,
Unless otherwise specified, fiberglass products should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15℃-35℃ and 35%-65% respecitively. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high. When the pallets are stacked in 2 or 3 layers, care should be taken to correctly and smoothly move the top pallet.
Direct roving for pultrusion is typically used to produce gratings, various rods and profiles.
Linear density（％）ISO 1889: ±5
Moisture content（％）ISO 3344: ≤0.10
Size content（％）ISO 1887: 0.55±0.15
Breaking strength（N/tex）ISO 3341: ≥0.40
Net weight（kg）: ≥13.0
Moisture content（％）ISO 3344: ≤0.10
Size content（％）ISO 1887: 0.55±0.15
Breaking strength（N/tex）ISO 3341: ≥0.40
Net weight（kg）: ≥13.0
