|
|
||||||||||||||
Product Properties,
1.Excellent anti-static property
2.Good choppablity
3.Excellent flowability
4.Good strand integrity, no fuzz and loose fiber
5.Excellent mechanical property
6.Good dispersion
Package,
The roving to be packed on 20 pallets for a 20' container. The detailed package is listed as follows,
4 X 4 rolls/layer, 4 layer/pallet, 10 pallets
4 X 4 rolls/layer, 3 layer/pallet, 10 pallets.
Each layer is seperated with paperboard.Each pallet is supported by very strong papercoil at the four corners of pallet, then packed in big carton, wrapped in a polythene stretched film. The roving on pallet after package is visible.
Storage,
Unless otherwise specified, fiberglass products should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15℃-35℃ and 35%-65% respecitively. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high. When the pallets are stacked in 2 or 3 layers, care should be taken to correctly and smoothly move the top pallet.
1.Excellent anti-static property
2.Good choppablity
3.Excellent flowability
4.Good strand integrity, no fuzz and loose fiber
5.Excellent mechanical property
6.Good dispersion
Package,
The roving to be packed on 20 pallets for a 20' container. The detailed package is listed as follows,
4 X 4 rolls/layer, 4 layer/pallet, 10 pallets
4 X 4 rolls/layer, 3 layer/pallet, 10 pallets.
Each layer is seperated with paperboard.Each pallet is supported by very strong papercoil at the four corners of pallet, then packed in big carton, wrapped in a polythene stretched film. The roving on pallet after package is visible.
Storage,
Unless otherwise specified, fiberglass products should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15℃-35℃ and 35%-65% respecitively. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high. When the pallets are stacked in 2 or 3 layers, care should be taken to correctly and smoothly move the top pallet.
E-glass fiber assembled roving for SMC is typically used to produce automotive parts, doors, bathtubs, water tanks and sports apparatus.
Sizing Content(%)ISO1887: 1.60±0.25
Moisture Content(%)ISO3344: ≤0.15
Linear Density(TEX)ISO1889: ±6
Stiffness(MM)ISO3375: 160±25
Net Weight(KG): 17.0±0.5
Moisture Content(%)ISO3344: ≤0.15
Linear Density(TEX)ISO1889: ±6
Stiffness(MM)ISO3375: 160±25
Net Weight(KG): 17.0±0.5
