|
|
||||||||||||||
Product Properties,
1.Fast and complete wet-out in resins
2.Good choppablity
3.Excellent integrity
4.Good moisture resistance and low fuzz
5.Good mechanical property
6.Good dispersion
Package,
The roving to be packed on 20 pallets for a 20' container. The detailed package is listed as follows,
4 X 4 rolls/layer, 4 layer/pallet, 10 pallets
4 X 4 rolls/layer, 3 layer/pallet, 10 pallets.
Each layer is seperated with paperboard.Each pallet is supported by very strong papercoil at the four corners of pallet, then packed in big carton, wrapped in a polythene stretched film. The roving on pallet after package is visible.
Storage,
Unless otherwise specified, fiberglass products should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15℃-35℃ and 35%-65% respecitively. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high. When the pallets are stacked in 2 or 3 layers, care should be taken to correctly and smoothly move the top pallet.
1.Fast and complete wet-out in resins
2.Good choppablity
3.Excellent integrity
4.Good moisture resistance and low fuzz
5.Good mechanical property
6.Good dispersion
Package,
The roving to be packed on 20 pallets for a 20' container. The detailed package is listed as follows,
4 X 4 rolls/layer, 4 layer/pallet, 10 pallets
4 X 4 rolls/layer, 3 layer/pallet, 10 pallets.
Each layer is seperated with paperboard.Each pallet is supported by very strong papercoil at the four corners of pallet, then packed in big carton, wrapped in a polythene stretched film. The roving on pallet after package is visible.
Storage,
Unless otherwise specified, fiberglass products should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15℃-35℃ and 35%-65% respecitively. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high. When the pallets are stacked in 2 or 3 layers, care should be taken to correctly and smoothly move the top pallet.
E-glass fiber panel roving is designed for continuous panel molding process. It is treated with a silane-based size and compatible with UP resin.
It is typically used to produce various GRP panels which offer light weight, high strength, high impact resistance and good light transmittance.
It is typically used to produce various GRP panels which offer light weight, high strength, high impact resistance and good light transmittance.
Sizing Content(%)ISO1887: 0.50±0.15
Moisture Content(%)ISO3344: ≤0.15
Linear Density(TEX)ISO1889: ±6
Stiffness(MM)ISO3375: 105±20
Net Weight(KG): 17.0±0.5
Moisture Content(%)ISO3344: ≤0.15
Linear Density(TEX)ISO1889: ±6
Stiffness(MM)ISO3375: 105±20
Net Weight(KG): 17.0±0.5
