|
|
||||||||||||||
Product Properties,
1. Excellent glass lay-down
2. Optimum dispersion and low static
3. Good wet-out and compatibility
4. Outstanding runnability
Package,
The roving to be packed on 20 pallets for a 20' container. The detailed package is listed as follows,
4 X 4 rolls/layer, 4 layer/pallet, 10 pallets
4 X 4 rolls/layer, 3 layer/pallet, 10 pallets.
Each layer is seperated with paperboard.Each pallet is supported by very strong papercoil at the four corners of pallet, then packed in big carton, wrapped in a polythene stretched film. The roving on pallet after package is visible.
Storage,
Unless otherwise specified, fiberglass products should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15℃-35℃ and 35%-65% respecitively. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high. When the pallets are stacked in 2 or 3 layers, care should be taken to correctly and smoothly move the top pallet.
1. Excellent glass lay-down
2. Optimum dispersion and low static
3. Good wet-out and compatibility
4. Outstanding runnability
Package,
The roving to be packed on 20 pallets for a 20' container. The detailed package is listed as follows,
4 X 4 rolls/layer, 4 layer/pallet, 10 pallets
4 X 4 rolls/layer, 3 layer/pallet, 10 pallets.
Each layer is seperated with paperboard.Each pallet is supported by very strong papercoil at the four corners of pallet, then packed in big carton, wrapped in a polythene stretched film. The roving on pallet after package is visible.
Storage,
Unless otherwise specified, fiberglass products should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15℃-35℃ and 35%-65% respecitively. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high. When the pallets are stacked in 2 or 3 layers, care should be taken to correctly and smoothly move the top pallet.
E-glass fiber spray-up roving is typically used to produce FRP boat hulls, sanitary apparatus, automotive parts and cooling towers.
Sizing Content(%)ISO1887: 1.10±0.15
Moisture Content(%)ISO3344: ≤0.15
Linear Density(TEX)ISO1889: 2400±120
Stiffness(MM)ISO3375: 130±20
Moisture Content(%)ISO3344: ≤0.15
Linear Density(TEX)ISO1889: 2400±120
Stiffness(MM)ISO3375: 130±20
